awais98 Posted July 28, 2016 Share Posted July 28, 2016 (edited) Hi guys I'm relatively new here. I'm in San Antonio I'm finally starting a new setup first one here, and setting up the rodi system now. So I had this 4 stage brs rodi that I upgraded to a 6 stage and then changed every filter cartridge inside even the DI membrane Now when I run it, the preDi resin TDS meter is anywhere from 20 to 150 TDS!! I don't know why. And this is eating up my DI resin so fast, just 2 brute cans and its 80% gone in the first canister. I did flush the system pre DI resin for an hour before the first use. And I also flushed it before each of those 2 times that I filled my brute can. I have a water Softner and this rodi is set after the Softner. What is wrong with this? Is the water that hard here in San Antonio? Or am I doing something wrong? Experienced folks please give some guidance. Thank you Awais Sent from my iPhone using Tapatalk Edited July 28, 2016 by awais98 Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted July 28, 2016 Share Posted July 28, 2016 Hi guys I'm relatively new here. I'm in San Antonio I'm finally starting a new setup first one here, and setting up the rodi system now. So I had this 4 stage brs rodi that I upgraded to a 6 stage and then changed every filter cartridge inside even the DI membrane Now when I run it, the preDi resin TDS meter is anywhere from 20 to 150 TDS!! I don't know why. And this is eating up my DI resin so fast, just 2 brute cans and its 80% gone in the first canister. I did flush the system pre DI resin for an hour before the first use. And I also flushed it before each of those 2 times that I filled my brute can. I have a water Softner and this rodi is set after the Softner. What is wrong with this? Is the water that hard here in San Antonio? Or am I doing something wrong? Experienced folks please give some guidance. Thank you Awais Sent from my iPhone using Tapatalk Awais, I responded to you on Maast already with some thoughts if you haven't seen it yet. Let me know if you have any questions. Quote Link to comment Share on other sites More sharing options...
Isaac Posted July 29, 2016 Share Posted July 29, 2016 .... on Maast already....traitor! nah, good equipment deals down there 1 Quote Link to comment Share on other sites More sharing options...
Isaac Posted July 29, 2016 Share Posted July 29, 2016 Now when I run it, the preDi resin TDS meter is anywhere from 20 to 150 TDS!! I don't know why.Check out this thread... http://www.austinreefclub.com/topic/30480-making-water-in-pflugervilleround-rock/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.