+KimP Posted November 13, 2013 Share Posted November 13, 2013 Does anyone know if these things can be opened? My pump has slowly stopped working and the impeller gets stuck. I'd like to open it up and see what's going on. I don't dose through the ato, so I'm not sure what could be making it stick. Quote Link to comment Share on other sites More sharing options...
victoly Posted November 13, 2013 Share Posted November 13, 2013 I'm not sure that they can be opened up. Are you using it with the osmolator or standalone? You can test the pump standalone by connecting a 12v battery to it. you might also try a vinegar soak and see if there's just grunge in there. if all else fails, aquatek has em for like a buck more than you can get from roger. Quote Link to comment Share on other sites More sharing options...
+KimP Posted November 13, 2013 Author Share Posted November 13, 2013 Okay I'll try the vinegar. I use it with the osmolator. Quote Link to comment Share on other sites More sharing options...
Juiceman Posted November 13, 2013 Share Posted November 13, 2013 Mine stops working all the time, mostly when the top-off container gets low. I let it sit for a while, and then turn it back on and it starts working fine after that. Quote Link to comment Share on other sites More sharing options...
victoly Posted November 13, 2013 Share Posted November 13, 2013 OHHH might be air locked! good point! Quote Link to comment Share on other sites More sharing options...
+KimP Posted November 13, 2013 Author Share Posted November 13, 2013 I bang it around in there each time I switch jugs and that gets it going. Over time it's pumped water slower and slower and slower until now it doesn't pump at all. If I pull it out and start to spin the impeller manually it'll kick on, but as soon as I stick it back in the water, nothing. No amount of jiggling it around in there helps anymore. I've left the pump sitting for days and still nothing. Quote Link to comment Share on other sites More sharing options...
jestep Posted November 13, 2013 Share Posted November 13, 2013 I had to replace mine when it started doing that. Some of the pump coils are probably burned out. In the air there's no resistance so it spins but as soon as you put it in the water it bogs the motor down, or it's being shorted internally. You can find the motor on ebay and probably most fish stores that carry Tunze products. Not sure if anyone carries them locally. Quote Link to comment Share on other sites More sharing options...
esacjack Posted November 13, 2013 Share Posted November 13, 2013 aquatek carries the pumps locally. Quote Link to comment Share on other sites More sharing options...
Planeden Posted November 13, 2013 Share Posted November 13, 2013 If I pull it out and start to spin the impeller manually it'll kick on do you wear a scarf and googles and yell "clear" whenever you do that? Quote Link to comment Share on other sites More sharing options...
+KimP Posted November 13, 2013 Author Share Posted November 13, 2013 If I pull it out and start to spin the impeller manually it'll kick on do you wear a scarf and googles and yell "clear" whenever you do that? No, but I would if it might help, lol! Quote Link to comment Share on other sites More sharing options...
+KimP Posted November 13, 2013 Author Share Posted November 13, 2013 So can I use any other pump with the nano osmolator? I have an aqualifter. If not I'll just get another. Bummer though. Quote Link to comment Share on other sites More sharing options...
victoly Posted November 13, 2013 Share Posted November 13, 2013 I dont think you can use another pump. Some ATOs have a 120v regular old switch you can plug whatever pump you want into, but I think the tunze uses a DC pump. Theyre not super expensive, i wanna say like 20-30 bucks? Quote Link to comment Share on other sites More sharing options...
+KimP Posted November 13, 2013 Author Share Posted November 13, 2013 Oh okay, that's not bad. Thanks! Quote Link to comment Share on other sites More sharing options...
mFrame Posted November 14, 2013 Share Posted November 14, 2013 Call Roger at Tunze here locally, he'll know the answer and be able to set you up with whatever fix you need. (in our sponsor section) Quote Link to comment Share on other sites More sharing options...
victoly Posted November 14, 2013 Share Posted November 14, 2013 Roger actually steered me to Aquatek to purchase. Quote Link to comment Share on other sites More sharing options...
esacjack Posted November 14, 2013 Share Posted November 14, 2013 ditto.. the pump is just a 12v pump. Roger sent me to Aquatek. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.