Jump to content

Lps torch's sudden death!?


ct67stang

Recommended Posts

My dt is mainly lps; acans, hammers, big blastos, torches, etc. I noticed one torch colony was randomly closing one or two heads at a time. Which didnt happen before. I havent moved it or done anything different. I checked all my parameters and they are where they need to be. So my question, is there any hitchhiker that will attack lps? Is there a recommended dip for torch coral or lps coral in general? Thanks in advance for your help

Sent from my MB855 using Tapatalk 2

Link to comment
Share on other sites

Ph 7.8

Sg 1.023

Nitrate 0

Alk. 12

Amonia 0

Phos. .04

Been this way for a month or so.

Let me know if im missing anything

Sent from my MB855 using Tapatalk 2

The only difference from a month ago was a high phosphate issue 1.3 was the reading, if i remember correctly. I syphoned my sand and added phosguard and my dt has been thriving since. Huge polyp extencion.

Sent from my MB855 using Tapatalk 2

Link to comment
Share on other sites

That's ALK is pretty high but if its been consistent there with everything happy, then idk.

Make sure nothing is brushing it. You'd be surprised how long lps sweeper tenticles get at night.

If there's any brown slime, get it off of it. That can bother it too. May be a good idea to frag off the affected heads.

Link to comment
Share on other sites

I had an Aviapora that dropped from a ledge, as far as I could tell it dropped and landed on the rock it was attached to, I did not see any damage. It did not open much the next two days, I figured it was just pissed, and the third day it was gone. You indicated that yours was not moved so not sure if maybe something fell on it?

Link to comment
Share on other sites

That's ALK is pretty high but if its been consistent there with everything happy, then idk.

Make sure nothing is brushing it. You'd be surprised how long lps sweeper tenticles get at night.

If there's any brown slime, get it off of it. That can bother it too. May be a good idea to frag off the affected heads.

Yea it is high. I tested it just before i posted so might do a water change. I already removed the twin head that had the brown stuff. I noticed that if thay brown stuff gets on other coral it starts to kill it too. So i get it out asap. One thing that has changed is i bought a power head and it kinda changed to water flow. That torch colony lost alot of flow. Could that have done it? I moved it to better flow after i removed the infected head.

Sent from my MB855 using Tapatalk 2

Link to comment
Share on other sites

Lost that head this morning. It had three mouths:( so once this happens theres nothing that can be done? Ive removed that head and think might just cut all the heads off to try and save something out of that colony. There nothing i can dose?. A couple days ago a yuma shroom fell on a lobo and the yuma looked like it was losing the fight. When i removed it it had lots of slime on the contacted area. theyre both fine now but maybe thats where the issue started.

If theres something i can do to save these please let me know. Thanks

Sent from my MB855 using Tapatalk 2

Link to comment
Share on other sites

I lost a whole colony of frogspawn to coral war due to the slime. I also lost 4 heads of the same torch corals that we both got due to it too. I trashed the infected 1's and kept the 3 heads that were good. They are finally starting to get back to were they were previously. Hopefully I'm done with moving the corals, so I won't have this problem anymore. Mine was always due to movement.

Link to comment
Share on other sites

Remove all infected heads/colonies and do so without letting the slime free in your tank. This stuff took out my 50 head torch colony and acts FAST. Far better to lose a few-headed colony than to risk losing your big one by keeping it.

One of my previous posts documenting its progression here

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...