BBReefer Posted February 19, 2013 Share Posted February 19, 2013 I need help setting up the android app to control my apex lite. I have set up the ddns and controller. I can access the controller via webpage. So everthing is working. However, I am trying to fugre out what the settings need to be for the Android App? Any assistance is much appreciated. Quote Link to comment Share on other sites More sharing options...
Juiceman Posted February 19, 2013 Share Posted February 19, 2013 you need to put in your ip address and the port, then it'll ask for your password and username. you may need to use outside network ip address, and setup a port forward in your router with the port and ip for the apex so you can access it outside of your house. Quote Link to comment Share on other sites More sharing options...
BBReefer Posted February 19, 2013 Author Share Posted February 19, 2013 OK.. Here is what I have. What am I missing? Name: Apex Host: bbreefer.dlinkddns.com/1234 Port: 80 SSID: WAN Host: WAN Port: Username: admin Password: **** Quote Link to comment Share on other sites More sharing options...
Juiceman Posted February 19, 2013 Share Posted February 19, 2013 What's that from? The apex web page, the app, or your router Quote Link to comment Share on other sites More sharing options...
Juiceman Posted February 19, 2013 Share Posted February 19, 2013 Ok, Host: should be the in network IP address Port should be the port you set it at (default is 80) SSID is your router Wan host: is blank on mine Wan port: mine says 80, I'm not sure what yours needs to be, (80 is not the port I use) Username: I would advise you to change it to something individual to you Pass: same as above Quote Link to comment Share on other sites More sharing options...
Juiceman Posted February 19, 2013 Share Posted February 19, 2013 You can use the search setting in the app, they may make it easier! Quote Link to comment Share on other sites More sharing options...
BBReefer Posted February 19, 2013 Author Share Posted February 19, 2013 OK.... I am confused. Host: should be the in network IP address - Do I enter the Dynamic DNS here or the LAN IP (192.168.0.1)?Port should be the port you set it at (default is 80) I understand this oneSSID is your router I am not quite sure was goes here??? Is this not for wireless?? Do I have to be within the range of my wireless rout to use this app? Wan host: is blank on mineWan port: mine says 80, I'm not sure what yours needs to be, (80 is not the port I use)Username: I would advise you to change it to something individual to youPass: same as above Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.