bige Posted August 12, 2012 Share Posted August 12, 2012 Looks good. Tell your wife you already have buyers lined up on arc. Quote Link to comment Share on other sites More sharing options...
+boognish Posted April 15, 2013 Author Share Posted April 15, 2013 Update time... Seems like things are finally starting to grow, and most of the zoas are hanging in there, so I've started moving more coral from the old 75 gallon to the 175. The 75 had 150W MHs and 96W actinics. The 175 has 3x400W MHs. I took par measurements in both tanks and I'm trying to place things where the par is close the the same and acclimating them with a shortened light period. I just replaced the 400W MHs and allowed them to burn in for a week. I will re-check and compare PAR readings with the old and new bulbs. All pics were taken with Samsung Galaxy S3. This guy was a great grower in the 75, but only had blue tips. It still has fully extended polyps, so I'm hoping it colors up in the new tank. Now for the bad news... While I was off snowboarding, my neighbor called and informed me that my return pump was not on and that the tank was blowing bubbles. I suspected the pump in the saltwater mixing station was going bad and was the culprit for a tripped fuse in the garage. I had him unplug it and the return pump came right back on. The following day, my Brother in law checked the tank and called to tell me there was about 1/4 inch of water in the stand. (I made it water tight, so it wasn't on the floor). I assumed the wavebox pumped water up and it just overflowed the sump a bit. I spent a week getting the salinity back up (was down to 1.02-ish) since taopoff replaced the spillage. During the first water change when I got back, the tank level went way below the overflows and the sump quickly filled to the top when I cut off the return pump. I turned the flow back on and realized that the top supports had broken (heat maybe??). My bow-front is now a bow-front/back. The back had pulled away from the overflow's vertical side and water is just flowing in along the back to about 1/3 down. My heart sank. To avoid a complete blowout of the back of the tank, I implemented a stop-gap short term 'fix'. I went to Lowes and engineered a bolt system that I could place between the tank and the wall that I could slowly open wider and press the bow-back in a bit. I drained the water about 1/3 down, placed the bolts between a board against the wall and one along the trim at the top of the tank (dispersing the load), and opened up the bolts ... slooooowly... It brought the bow in and I am no longer worried about a blowout while I find the time and figure out a more permanent fix. I will be adding some of the reef epoxy I use to mount corals (cures in water) to temporarily seal up the vertical piece where it's leaking into the overflow. Once I find 2 or 3 full days where I can be at the house over a weekend, I will implement my long-term fix: move all coral from the top levels to the bottom drain the water and place an airstone and an extra powerheads use my bolt system to bring the 'bow-back' all the way straight and add support: option 1: find or fabricate a new top trim and supports option 2: create new front-to-back supports with cables that I can adjust like the back bolts I am using as a temp method option 3: eurobrace the back of the tank option 4: a combo of #3 and either #1 or #2 re-silicone the overflow vertical against the back Wait for silicon to cure and refill the tank, cross fingers, and remove the temporary fix. I am not looking forward to cutting flow for a 24-48 hours while silicon cures, but I don't think it is avoidable. If anyone has experience or input on any of the methods I'm considering, please feel free to chime in. Quote Link to comment Share on other sites More sharing options...
madsalt Posted April 15, 2013 Share Posted April 15, 2013 wow man I am sorry to hear what happened, I was blown away by your tank when I picked up the xenia. I certainly hope everything works out. by the way since I live basically around the corner if you need a tank sitter or any help and I am around please feel free to give me a shout, i'll PM my number again. and what is that super pink coral? Quote Link to comment Share on other sites More sharing options...
sifuentes31 Posted April 15, 2013 Share Posted April 15, 2013 Glad the bracing worked out at least for the moment. Should really think about doing a Euro-brace when you get ready to repair it though. Pretty smart on the bolt system Quote Link to comment Share on other sites More sharing options...
+boognish Posted April 16, 2013 Author Share Posted April 16, 2013 wow man I am sorry to hear what happened, I was blown away by your tank when I picked up the xenia. I certainly hope everything works out. by the way since I live basically around the corner if you need a tank sitter or any help and I am around please feel free to give me a shout, i'll PM my number again. and what is that super pink coral? Thanks for the offer on help - I may take you up on that when it comes time to implement the final fix. The pink sps is Pink Setosa. It is starting to encrust the rock I mounted it to, but I think it is a bit faded. It certainly glows under the MH and the T5s. Quote Link to comment Share on other sites More sharing options...
ct67stang Posted April 17, 2013 Share Posted April 17, 2013 What about those zoas with the white skirts? And the other colorful zoas? Rastas? Let me know if i could buy a few<br /><br />Sent from my MB855 using Tapatalk 2<br /><br /> Quote Link to comment Share on other sites More sharing options...
offroadodge Posted April 17, 2013 Share Posted April 17, 2013 tank is looking great...I realy need to stop by. I have another little one due at the end on May so my time is only gonna get less. Maybe I can stop by this weekend. Quote Link to comment Share on other sites More sharing options...
Eloy Campuzano Posted August 6, 2013 Share Posted August 6, 2013 Any updates? I figured you have water in that thing by now Combination of the holidays and a crazy New Years deadline for a work project has slowed me down again... The good news is, the tank is in the house and on the stand. This is the first time I put it up there and it fit perfectly into the curved molding I made with absolutely no wiggle-room... whew! Measure twice, cut once. I have ordered a couple buckets of salt and started setting up the water ATO and mixing station in the garage, but I ran into some water issues and need to have someone check it out. In the past, when I ran the hot water for a shower, occasionally a spurt of gray water would fly out... It only happened when I ran the hot and I assumed it was something collecting in my water heater so I flushed the water heater. It still happened occasionally. When I hooked up my RO/DI system, I discovered the source of the 'gray' water... There is what appears to be something like bearing grease coating the line going INTO the water heater which is where I tapped in for my RO/DI. I do not want to use the water for fear that it will not all get filtered out and kill everything in the tank. My questions are: Has anyone seen anything like this before? Can anyone recommend someone to check it out? I was thinking city water, but would prefer someone who likes their job and cares... Would an RO/DI system effectively filter out what appears to be petroleum based? If it would filter it out, I'm sure I'd be burning through filters and membranes and having to constantly monitor TDS, so I'd prefer to resolve the situation instead of working around it. Awesome build, would you consider building another for a fellow hobbyist. I have a 175g Oceanic but i don't have a stand. I would pay for all expenses of course. Can you contact me please. In the Austin area. Quote Link to comment Share on other sites More sharing options...
+boognish Posted March 21, 2015 Author Share Posted March 21, 2015 Well, my temporary 'stop-gap' fix for the failed top supports in April 2013 ended up not being as temporary as I planned. Here's a link to the post with my 'temporary' fix for broken top supports. Last week, I noticed that I was going through more top-off than usual. There was no water in the garage where my bulkheads, pump and chiller are, so I inspected under the tank. Yup... there was water in the stand and occasional drips. I have a leak. The front left where the bowed glass meets the side has a pretty steady drip of water flowing down, welling up in the trim all the way around the tank, and flowing over into the stand underneath. I guess the 'fix' was ok for the back, but the broken supports were putting strain on the top front as well and allowing them to bow out and the seams to fail. After a day, I noticed the flow had slowed due to salt creep, so I got some super-glue gel and crammed it all around where the leaky seam was. I've reduce it to a gradual drip... for now... I think I may put a strap around the top to prevent catastrophic failure. If I hadn't of spent the better part of a year and good chunk of change building the custom stand and canopy, I would get a new, larger tank. Instead, I have decided to remove all rock, livestock, and substrate, then completely drain, reseal, and repair the tank. Although I am just getting SPS back in after an alk swing killed 90% of it, everything is doing great. Zoas and shrooms are spreading everywhere and not looking like frag plugs, and it's just finally looking more natural. And now I have to tear it down... I had to figure out a way to to provide front-to-back support on the top where the trim has failed. I decided to use two cables with brackets spanning from front to back with brackets hanging over each end. All stainless steel to prevent corrosion. So far, the only progress on this part are the brackets. To prevent them from slipping up over the edge, the cables will attach lower than the front lip causing it to pull in towards the tank. Both supports are broken at the back. I have set up a temporary system to house everything in. The 150 gallon tub should hold most of the livestock and rock pillars. Complete with a frag tank and 1/3 hp chiller beneath the top resevoir. Water flows from the big tub up to the black container where I'll have a skimmer and calcium reactor drip, overflows into the 20-long frag tank which will hopefully hold smaller frags and anemones/clowns, then back into the 150 gallon tub. The amazing part of this setup is I didn't have to cut one piece of PVC or hose and didn't have to buy buy a pump, valve, chiller, or anything. The bulkhead attached to the pump even has an outlet for my skimmer and a ball valve with a hose for circulation in the tub already set up. My wife is a bit upset because my hoarding ways have been validated. She's very pleased with the state of our living room right now, too. Thankfully, Ty is also a hoarder and has loaned me his old T5 setup and MH fixture and ballast. I have ~40 gallons of saltwater ready for the transfer. I should be doing the transfer now, but I am writing this update instead. Procrastinating... Maybe it will all fix itself while I'm up here. Maybe I'll wake up and it was all a bad dream. Anyone want to go get a beer? Once I start this, I don't think I'll be getting away until it's done. 2 Quote Link to comment Share on other sites More sharing options...
+boognish Posted March 27, 2015 Author Share Posted March 27, 2015 All livestock and rock is on the life support system. Tank and sump are empty, the glass is scraped clean of coralline, and sandbed is in an old 55 gallon with saltwater and a koralia to prevent die-off which would cause a cycle when it goes back in. The life support system (AKA divorce evidence item against me #223) I have stripped the silicone off of the inside of the overflows and will tape and apply new silicone to them tonight. FYI, buy a lot of razor blades and wear gloves. They dull quickly and break. They hurt when they cut you, and when you forget about the cuts and clean the glass with Acetone, it hurts more... Tomorrow, I will start stripping all other silicone from the tank and hopefully have it all resealed and start the brace repair this weekend and allow the silicone a couple days to cure. I've been researching silicones. There are so many threads on the innerwebs that contradict which are safe, which are not safe, and which are sorta safe. I gave up on all the pros (who must have stayed at Holiday Inn last night) and just read the MSDS on as many as I could. Essentially, here's what I found. Silicone2 is NOT safe at all. Don't even consider it. Silicone1 (GM or Dow available at Lowes, Home Depot, etc) used to be safe to use as long as it was not labeled 'Mildew Resistant'. This was usually the 'Doors and Windows' as opposed to the 'Bathroom and Sink'. However, they are now adding Petrolium Distillates to both in addition to the mildewcides. I never found exactly what the Petrolium distillates do, but I did read it could prevent mildew as well. My research eventually lead me to Momentive RTV103/108. 103 is black, 108 is clear. It contains only methyltriacetoxysilane and octamethylcyclotetrasiloxane in proportions that somehow form a bond significantly stronger (60%?) than store bought silicones. I read that many tank manufacturers use it and the MSDS sheets say it is FDA and USDS certified as NSF safe for food contact. It is considerably more expensive than the others, but in my case well worth it for strength and safety. The only place I found it in town was Grainger and they had to order it for next-day delivery from Dallas. Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted March 27, 2015 Share Posted March 27, 2015 Nice work. I used the momentum as well for my front glass repair on my tank and it's still holding solid. How long have you been married? I've only made it to #45 on the divorce evidence items but I'm just breaking year 2 now of married life. I just want to see if I'm ahead or behind schedule. Quote Link to comment Share on other sites More sharing options...
+boognish Posted March 27, 2015 Author Share Posted March 27, 2015 Nice work. I used the momentum as well for my front glass repair on my tank and it's still holding solid. How long have you been married? I've only made it to #45 on the divorce evidence items but I'm just breaking year 2 now of married life. I just want to see if I'm ahead or behind schedule. 14 Years this May 26th! So it looks like you could be slightly ahead of schedule. Mine averages out to ~16 a year, but as your relationship grows, you learn ways to earn some credits back. Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted March 27, 2015 Share Posted March 27, 2015 Oiy! Looks like I'm a go-getter on the evidence items! I better start figuring out this credits system. Makeshift setup is looking good sir. I wish you well in the tank repair! Quote Link to comment Share on other sites More sharing options...
Reburn Posted March 27, 2015 Share Posted March 27, 2015 Boognish, I have a couple tubes of momentive RTV108 clear if you need to use one to get you tank up and running. 1 Quote Link to comment Share on other sites More sharing options...
+boognish Posted March 30, 2015 Author Share Posted March 30, 2015 Boognish, I have a couple tubes of momentive RTV108 clear if you need to use one to get you tank up and running. Thanks for the offer, Reburn, but I have 4 tubes of RTV 103. Considering my work, family, hockey, and coaching schedule, I knew this would take a while, so I took the time set up a pretty elaborate temporary setup that will hopefully keep everything alive and happy long enough. I've done the inside of both overflows, which proved to be no simple undertaking in such cramped space. I used the caulk gun tubes, but recommend small tubes for easier application inside overflows. The rest of the tank is stripped of the old and ready for new silicone tomorrow. The silicone should have plenty of time to set while I set up the fix for the broken trim supports and figure out how to hang my new light system in the canopy. 2 Quote Link to comment Share on other sites More sharing options...
+boognish Posted April 18, 2015 Author Share Posted April 18, 2015 I started the transfer back into the 175 tonight. A late start combined with two broken rock pillars that needed to be rebuilt and 4 NHL 1st round, game-2 playoff games means I'll be up all night. I underestimated the amount of new saltwater I would need, so I'm in limbo. Right now, my 2 Black Ocellaris, 2 large RBTAs, 3 pajama cardinals, and target mandarin are still in the 25 long tank with all the coral and only 2 Koralia Nanos. Big Bertha (my giant 1' x 1.5' Derasa), Dejardinis Tang, Hippo Tang, Melanurus Wrasse, and Pinkbar Blenny are in the 175, with an mp40 and Tunze Turbelle. I am currently posting this to get away from watching my RO/DI make water. I'm pretty sure I only slow it down. I just need about 3 to 5 gallons to be able to get the flow going and get a couple hours of sleep before my daughter's swim meet... 75 gallons-per-day suddenly seems slower than it ever was before. 1 Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted April 18, 2015 Share Posted April 18, 2015 I'm sure you're a zombie right now with the lack of sleep! It must be very exciting though to be able to have your tank back. I'm sure your wife is happy at least to have the living room back! Quote Link to comment Share on other sites More sharing options...
+boognish Posted April 21, 2015 Author Share Posted April 21, 2015 I'm sure you're a zombie right now with the lack of sleep! It must be very exciting though to be able to have your tank back. I'm sure your wife is happy at least to have the living room back! Sleep? What is that? If only everything was completely moved back into the 175, she would be ecstatic. Between pee-wee hockey tournaments in College Station, an Olympic hopeful, scholarship-hunting daughter at swim meets in Bee Caves, work, and now... (for some reason it decides to rain in Austin) my lawn and garden are going nuts... who has time for sleep? I have been working on the tank after hours (10 - 3am-ish). Good news is, no leaks, and I finished re-aqua-scaping tonight and I am finally ready to move all of the frags and colonies back in. My clam has grown so much and ALWAYS works it's way up against the front glass, so I had to sacrifice some sand-bed and build a rock barrier to keep it back. I'm sure the scaping will change as I put the nems, frags, and colonies back in tomorrow night, but so far I like what has developed. Here's an unfocused and blown out pic of tonight's progress. Once frags, nems, etc are in and the temporary system is moved out of the living room, I can start to re-doing all electrical, controllers, etc. and set up my new light system. I am switching from MH to LEDs, but that's entirely a different subject and post... 1 Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted April 21, 2015 Share Posted April 21, 2015 I see some nice spots in that aquascape for some sps colonies! That's funny, I thought the clam I had was the only huge clam that walked. He'd do the same thing... started moving to the front glass and I'd have to move him back monthly. Quote Link to comment Share on other sites More sharing options...
Gig 'em @ NDstructible Posted April 21, 2015 Share Posted April 21, 2015 Nice work. I used the momentum as well for my front glass repair on my tank and it's still holding solid. How long have you been married? I've only made it to #45 on the divorce evidence items but I'm just breaking year 2 now of married life. I just want to see if I'm ahead or behind schedule. 14 Years this May 26th! So it looks like you could be slightly ahead of schedule. Mine averages out to ~16 a year, but as your relationship grows, you learn ways to earn some credits back. Man, I'm on like #38, and I don't even get married for another month! I win! I win! Sorry to hear about the tank fiasco, leaks are a huge pain in the butt! Glad to hear it's all back up and running, it's looking good now that water is back in there Quote Link to comment Share on other sites More sharing options...
+boognish Posted May 4, 2015 Author Share Posted May 4, 2015 I see some nice spots in that aquascape for some sps colonies! That's funny, I thought the clam I had was the only huge clam that walked. He'd do the same thing... started moving to the front glass and I'd have to move him back monthly. I think this aquascape is finally ready for those colonies you're so graciously offering up, @JeeperTy! Or did I read too much into that? The 175 has been back up and running for three weeks, now. So far, my support repair has held, the seems are not leaking, and I only had two casualties: An unknown tiny sps colony and my pinkbar goby. I'm not sure why the pinkbar died 2 weeks after going back in, but I suspect stress since every other fish seems to be fine so far. My two rose bubbletips found new places and are bubbling up for the first time since I got the original a couple years ago. My rock barrier has kept "Big Bertha" the clam in place. Ordinarily, it would be against the front glass by now. The barrier created a pretty cool sandbed area and some low rocks that are prime real-estate for zoas. Right now, I'm just using the area as a temp holding spot until I figure out where everything should go. This weekend, I took out the 3x400w MHs and installed 3x AI Hydra 52s and got the canopy back on it's lift arms. The Hydra52s will be 11.5" off the surface in the water, but the canopy is currently in its upper position, so they are presently about 2" off the surface. After all the stories of people burning their coral, I wanted to make sure my light cycle and photoperiod programming was right before lowering it. This coral has been in a holding tank for a month while I did the repair, so they need a slower acclimation. I am amazed at the color these lights can bring out of what I thought was boring old, faded coral! I'll be lowering the canopy tomorrow, fine-tuning the color frequencies and levels this week, and hopefully getting some better pictures. There's a big window right behind the tank, so daytime shots are pretty much impossible. Once I get the colors where I like them, I can post the Apex programming and levels for anyone interested. Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted May 5, 2015 Share Posted May 5, 2015 Pretty awesome! I'm sure it's gratifying to have everything work out so nicely. For you bud, I'll only charge you $500/colony. [emoji14] They're FarmerTy exclusives! Quote Link to comment Share on other sites More sharing options...
+boognish Posted May 9, 2015 Author Share Posted May 9, 2015 A couple days before breaking down the tank for repair, I took video of everything in case livestock didn't make it through the ordeal and to have a record of the aquscape and where everything was. When I took that off of the GoPro, I found video form before "The Great SPS Die-Off". I miss the colorful branches and am currently hunting to restock it all. What I ended up with was way too much footage to choose from so it's a long video. I don't expect many to make it all the way through, but somewhere around 8 minutes, I do go into the tank and chase fish around for a while and find some blue zoas I thought I had lost doing great behind some rocks. I may need to remove the audio track because I received a warning that it's copyrighted and the video is blocked in some countries. Watch it at YouTube in HD if you have the bandwidth. And if you have any of the sps you see in the first half video that you can frag, PM me! Quote Link to comment Share on other sites More sharing options...
FarmerTy Posted May 9, 2015 Share Posted May 9, 2015 Nice video! I felt like Jacques Cousteau there for a brief 15 mins! Quote Link to comment Share on other sites More sharing options...
+boognish Posted May 8, 2020 Author Share Posted May 8, 2020 Five year update and pictures... (Actually - 4 years and 364 days to be exact) The 175 gallon bowfront went through a slow period. Most SPS would fade and eventually die. Zoas receded and some disappeared. Had bubble algae taking over even though I would clean out what I could get off rocks easily and performed weekly water changes. I sent in an ATI ICP test and discovered I had 0 phosphates and high nitrates (~20-25). Pretty much everything was undetectable except calcium, magnesium, and alkalinity, thanks to my calcium reactor. I was starving all of my coral. I was surprised to find high nitrates because I run BioPellets. Discovered that Nitrates won't come down without phosphates. To increase them, I've been dosing phosphates via Neo-phos and Spirulina powder. To maintain .02 - .03 phosphates, I have to dose phosphates daily. Nitrates have only gone up. I've tried feeding less, biopellets, and Reef Biofuel as a carbon source, but they aren't coming down. Everything is doing GREAT with the increased phosphates, though. The Bubble algae is GONE! Vibrant WORKS! I used it for about 8 weeks. Nothing changed until about week 6, then poof... they were gone. I put some in every other week as maintenance. Bad News... I am pretty sure I killed my clam, Bertha. She was over a foot long and tall. I got it 16 years ago when it was only 3 inches and dumped at least 10 complete calcium reactors worth of media into it. A couple days after it died, I discovered exposed, sizzling wires on my skimmer pump. So.. I am pretty sure she cooked for a week or so as she died. Made me sick to my stomach. I may put the shell back in the tank and try to get a bunch of my Shermans to host inside... Current Photo Dump - All shots taken with my old OnePlus 3t - pro mode with no filters. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.